|
|
| Across-the-Line
|
| |
Connects motor directly to power source.
Full voltgage applied to motor when controller is actuated.
|
|
|
| Wye Delta Closed
|
| |
Same sequence as Open Transistion. Connected to resistors in each phase during transistion from wye to delta. |
|
|
|
| Autotransformer
|
| |
Starters supply reduced voltage starting at motor terminals through use of tapped, 3-phase autotransformer. A timing relay causes transfer of motor from reduced voltage start to line voltage operation without disconnecting motor from power source |
|
|
| Wye Delta Open
|
| |
On controller activation, motor windings wye-connected for starting. After a time delay, automatically converts to delta connection for running, applying full voltage to motor windings. Most often used with transfer swithc/emergency generator applications. |
|
|
|
| Part Winding
|
| |
Motor starts on one winding. After a time delay second winding is connected in parallel to the line. |
|
|
| Variable Speed Micro-Processor Based
|
| |
Micro-processor based it displays module and pressure adjustment that is accessible without opening main door.
Has built in variable frequency drive.
|
|
|
|
| Soft Start
|
| |
Reduces inrush current to motor with adjustable ramp time. Stop sequence reduces possibility of surges occurring in the system. |
|
|
| Limited Service
|
| |
Full voltage across-the-line starting.
Peak inrush current approximately 6 times full laod motor current..
|
|
|
|
| Primary Resistor
|
| |
When controller is actuated, a resistance is connected to each phase. Resistors are by-passed after a time delay and motor then runs at full voltage. |
|
|
